5V1A/5V2A Wireless Charging Module DIY Wireless Charger Circuit Board Wireless Power Supply

Label:Yes Transmitter coil size: outer diameter 43mm(1.69in), thickness 2.3mm(0.09in) Transmitter module size:18mm(0.71in)*8.5mm(0.33in)*15mm(0.59in) Load current: 1.3A Receive output voltage and current: 5V/2A,12V/700mA Receiver coil size: 43mm(1.69in) outer diameter, thickness 1.2mm(0.05in) Receiver module size: 10mm(0.39in)*25mm(0.98in)*3mm(0.12in) Input voltage: 9~12V Receiving good distance:3~6mm(0.12~0.24in) Special instructions:

Before use, please distinguish the transmitter and receiver according to the diagram. Do not reverse the wiring. Do not let the two coils touch directly. The spacing is between 1-20mm. The 12V battery cannot be used directly for power supply. The nominal voltage of the battery is 12V. The normal full output can reach 12.8~13.5V. You must add a voltage regulator module before you can use it. For wireless charging, the input must be greater than the output. If you want to output 10W, the input must be above 10*1.30W. There is power loss when the power supply is converted to wireless charging.

Package Included: 1 set Wireless Charging Module